Venzo 1 x Bike Bicycle Cycling Pedal Wall Mount Indoor Storage Hanger Stand - Hook Rack Holder - Great for Garage and Shed

$13.00

    This fits your.
  • Make sure this fits by entering your model number.
  • STURDY PEDAL HOOK: You can stack multiple bikes on the wall, instead of hanging 2 bikes, you can hang 3 bikes on the same size of wall at the angle of 45 degree. Max loading weight: 20kg or 45 lbs.
  • NO TUNING HANDLEBAR: The wheels are siting again the wall. So no more turning handlebar or wheels which could be accidentally knocked.
  • QUALITY: The hook is made of high quality heavy duty steel. The hook is also rubber padded to protect the pedal. The included screws are good quality too. Safer than other types: Pedal hook installed lower than normal bike hook.
  • EASY TO INSTALL: Easy installation, all screws and anchors are included, you can mount this hanger on brick, wood stud, or even on a drywall with particular anchor. Please watch the VIDEO in the listing for more details. Weight: 260g (0.57 lbs).
  • ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide a life time warranty! Made in Taiwan.

Brands:

Brand: Venzo

Product Code:

B074FWTTSK

Availability:

In Stock
Bike Hanger Bicycle Wall Hook Mount Holder Garage Vertical Rack Indoor Storage

Pedal hook without tire brackets (for weight balanced bike)

  • STURDY PEDAL HOOK: You can stack multiple bikes on the wall, instead of hanging 2 bikes, you can hang 3 bikes on the same size wall at the angle of 45 degree. Max loading weight: 20kg or 45 lbs.
  • NO TURNING HANDLEBAR: The wheels are siting again the wall. So no more turning handlebar or wheels which could be accidentally knocked.
  • QUALITY: The hook is made of high quality heavy duty steel. The hook is also rubber padded to protect the pedal. The included screws are good quality too. Safer than other types: Pedal hook installed lower than normal bike hook.
  • EASY TO INSTALL: Easy installation, all screws and anchors are included, you can mount this hanger on brick, wood stud, or even on a drywall with particular anchor. Please watch the VIDEO in the listing for more details. Weight: 260g (0.57 lbs).

1

1

1

Secuely Holding The Pedal

Holding the bike on the pedal.

Good For Solid Wall or Stud

Please make sure all 3 bolts are mounted on the stud securely. Please watch the video in the listing for more details.

Clean and Nice Garage

Great looking bikes on the wall now!

Read more

design

GREAT SELECTION

SOURCING TOP PRODUCTS

VIDEOS

BICYCLE EXPERTS

We design and develop premium bicycle parts and accessories.

WIDE SELECTION

With more than 2000 high quality and best value products, you will always find what you need.

SOURCING TOP PRODUCTS

All the products we stock are carefully selected from the factories in the cycling industry.

PRODUCT VIDEOS

Our team are working hard to try add videos of all the products we are selling. This will allow customers to have a visual image of the products and learn how to use it before purchasing.

Read more cd Read more
Product details
  • Product Dimensions: 2.4 x 2.8 x 2 inches
  • Shipping Weight: 9.6 ounces (View shipping rates and policies)
  • ASIN: B074FWTTSK

If you take your time and plan carefully you can stack multiple bikes on the wall. This product does not include the little shelves for the tires--I bought those separately from home depot. If you have bikes with really wide bars you may need to add a spacer.

UPDATE: I bought two more.

Pros:
1. These mounts are made of thick metal and are strong.
2. The mounts are coated with a thick rubbery material to avoid scratching your bike.
3. Bikes look nice hanging from these mounts.

Cons:
1. The mounts are to be screwed into a wall via three holes that are arranged in a ā€œVā€ shape. The distance between the top two holes (center to center) is approximately 1 3/16 inches, barely less than the 1.5 inch thickness of a 2x4 stud. It is therefore very difficult to attach a mount to a typical wall stud because the holes are spaced too far apart. I decided to drill a new hole between the top holes and I used two substantial deck screws to mount them, which worked fine.
2. This method of hanging bikes on the wall works well for lightweight road bikes but not for mountain bikes. My full suspension mountain bike will not hang level on the wall as it is too front heavy. I needed to devise a method to support the front wheel to hang this bike.

Overall impression: I would recommend these mounts if you are willing to make some modifications to make them work.

Strong, simple, functional, no frills design. As with other products of this sort (DaHanger for example), the upper drilled holes are too wide apart for both screws to make solid contact in standard U.S. wall studs (2x4's which are actually 1.75x3.5). If you're a U.S. purchaser, be sure to research and use one of the hanging techniques that other customers have come up with to deal with the issue and achieve a solid, reliable anchor that will safely hold the weight of your bike. One other minor issue to mention (and suggestion to the manufacturer): the length of the lower section is sized to fit anything from a small clipless pedal to an oversize flat. While this single "one size fits all" works, overall, and is certainly an economical solution for the manufacturer, it means that if you have small pedals, your bike hangs at a steeper angle from the wall than absolutely necessary. A product specifically sized for smaller pedals (or designed with some adjustability in the length of the lower section) would allow a more upright hang position and save space.

Great for narrow spaces. clean solution for multiple bikes. You can really get the bike out of the way if you put it up high enough because the wheels are so close to the walls and the handelbars will be higher than your head. This worked well for us with multiple bikes in a tight 2 car garage with 2 cars parking in and out regularly. Normally I put hooks in the ceiling and hang by the wheels but the ceiling was too high. Make sure you locate on the center of a stud. Carefully locate the stud since this has a relatively wide hole pattern for a single stud. You can do some test holes with a tiny drill bit after you think you found the stud to be extra sure you are centered on the stud.

My bike looks cool hanging in my garage. Not sure why they didn't have a top hole above the bottom. I drilled a hole between the top 2 holes as screws wouldn't go into the stud, but on the edge of it. My bike is front heavy and wanted to rotate face down. I cut a couple small pieces of wood and attached to the wall for the tires to rest on.

I am so delightfully pleased with this product, how efficiently it allowed me to use the very small amount of space in my NYC apartment, and how surprisingly sturdy it turned out to be. Note that I added in a shelf in my picture to support the front wheel (it did hold without, the bike was just held at an angle - also, this bike is an intensely specialized mountain bike that I suspect distributes weight in a strange way). My only gripe is that the drywall screws were trashhhhhhhhh. I used other ones I had, which worked like a dream. So happy this exists. It was surprisingly easy once I did the measurements properly.

Good quality. Good enough for use in the house. Only issue is the length causes the bike to lean out from the wall a lot. It cold be 1.5" shorter for typical quill pedals. Quite a bit shorter for clipless.
The angle is just right for 650b wheels and larger.
Mount to the pedal is excellent and very robust.

probably should have bought the associated tire rests to stabilize the bike on the wall but, this little piece of metal works great to get my bike up and out of the way

Good quality well made

Great product, fit for purpose