SOLAS Sea Doo 4-Tec Impeller SR-CD-11/19 W/Wear Ring & Tool GTI 155 RXP GTS GTX

$232.87

    This fits your.
  • Make sure this fits by entering your model number.
  • New Solas Sea-Doo 4-Tec Impeller with Impeller Tool & Wear Ring, Solas SR-CD-11/19 - 11/19 Pitch
  • Includes: Solas Impeller SR-CD-11/19 / Impeller Tool WR011 / Wear Ring 267-000-104 / 267-000-419 / 267-000-021 / 267-001-236
  • FITS: SEA-DOO GTI / GTI SE 155 2007-2016 / RXP 155 2007-2008 / GTS Pro 130 2011 / GTS 130 2011-2015 / GTX 155 2004-2009 / GTX Wake 155 2004-2010 / GTI / GTI STD. / GTI SE 130 2006-2015 (Modified Only)
  • Increases low end, acceleration and adds +1-2MPH, Made from high strength corrosion resistant stainless steel
  • OEM quality aftermarket replacement parts, Exact item you will receive is pictured

Brands:

SOLAS

Product Code:

B071YNTQV7

Availability:

In Stock

NEW SEA-DOO SOLAS IMPELLER W/ IMPELLER TOOL WEAR RING Includes New Solas Impeller, Impeller Tool Aftermarket Wear Ring11/19 Pitch for use on mostly stock enginesIncreases low end, acceleration and adds +1-2MPHMade from high strength corrosion resistant stainless steelDirect replacement, no modifications required to install Exact item pictured Part Number:Solas Impeller SR-CD-11/19Solas Impeller Tool WR011Wear Ring 267-000-104 / 267-000-419 / 267-000-021 / 267-001-236 FITS: SEA-DOOGTI / GTI SE 155 2007-2018RXP 155 2007-2008GTS Pro 130 2011GTS 130 2011-2015GTX 155 2004-2009GTX Wake 155 2004-2010GTI / GTI STD. / GTI SE 130 2006-2015 (Modified Only)


Product details
  • Item Weight: 5.38 pounds
  • Shipping Weight: 5.4 pounds (View shipping rates and policies)
  • ASIN: B071YNTQV7

The Solas Impeller is much better than the stock one, and is a nice upgrade from stock. I have 2 identical Sea-Doos and the hole shot is definitely way better in a real life side by side comparison. The impeller removal tool worked great, and you can use a standard 1/2 drive socket on the head of it. Just remember you will also need a 12mm Allen head wrench, or socket to hold back on the other side of the impeller to remove it/install it. Also note 12mm is an odd size, and most sets only go up to 10mm, and for leverage reasons, I suggest getting a 1/2 drive allen head 12mm socket. Then use 2 breaker bars. Be sure to get the specified bearing grease, and spline grease as well. For whatever reason the wear ring O.D. was way to small (lots of slop, way to much to make up with any filler), also note that my stock model pump housing had 4 set screws apparently to keep the ring from spinning. 2 are real hard to see, and you have to slide off part of the housing to get to 2 of them, but trust me there is 4 total, and if you don't remove them, you will never get the old ring out. My 2004 Sea-doo GTX 4tec Wake called for an OEM ring 267000419. Seller sent me another one of the same rings, and also did not fit. Beware if you have my make and model as the supplied Titan Wear ring did not work for me, and I have a stock pump housing. Seller gladly refunded my money for the wear ring, and sent me labels to return the 2 rings. Great seller, friendly, and easy to deal with. When I am ready to get the Solas Impeller for my other Sea-doo, I will order it from them.

After contacting Bay Area Power Sports regarding questions I had for a replacement impeller for my sea doo, I ordered this Solas Impeller. The parts arrived as promised and packaged very securely. The fit was perfect and the instructions provided by Bay Area Power Sports were very helpful during my installation. The fit and finish of the Solas impeller was outstanding. It was a breeze to install the parts and I am thrilled to report my Sea doo is operating back at top performance. I had a great experience with these parts and this seller!

Fit perfectly on my sea Doo rxp 2007! Now it runs like a charm!!

Can’t believe what a difference this made in performance. Good quality product.

I replace the damaged prop on my Seadoo. This product was just as described and shipping was super fast.