KEEL Roller/Bracket Assy 5"



Brand: CE Smith

Product Code:



In Stock

Panel Bracket Assembly 5" Keel Roller - Black

Product Description
Pre-assembled for easy installation! Strong hot-dipped galvanized bracket with black rubber roller for proper keel support. Mounting slots are 3" on center.

Product details
  • Product Dimensions: 8 x 7 x 4 inches ; 3.7 pounds
  • Shipping Weight: 3.8 pounds (View shipping rates and policies)
  • California residents: Click here for Proposition 65 warning.
  • Item model number: 10401G

Overall this is a pretty solid unit, but the Quality of the Finish is very Rough! It had a LOT of very sharp edges, and one spot had a big welding defect that was VERY sharp and large. NO Quality Control. A few minutes with a file made it useable -- but will the Filing remove the galvanize and cause it to Rust? Why do we have to put with this ridiculous poor quality? We need to start making things in USA, and take pride in that again.

While many mentioned that the end caps come off, I should say cheezy end caps, I purchased this anyway. These reports are not unfounded.
The minute this roller shifted off came the caps. IF you are going to use this I would strongly suggest drilling the ends and installing a SS washer and a SS cotter pin.

Very heavy duty, but not perfect. They have very cheap retaining clips holding the roller pins in place. I took off the cheap clips, and drilled holes through the pins and put in cotter pins. I also grease the roller pin in the process. Not sure why they didn't come this way in the first place, the cheap clips are disappointing. Drilling the holes and adding washers and cotter pins might cost an extra 2$ per roller, but it would be worth it in my opinion. Other then that minor issue, the roller was very heavy and made from thick galvanized steel, and the roller itself was made out of a medium soft rubber which felt about perfect to me, not too hard and not too soft.

As many others have reviewed, the cap nuts do not stay on. If it's a design flaw, it needs to be addressed. Returns are not easy on boat trailer parts. Especially during a world pandemic!! Not worth the wait.

Great roller for my trailer. Boat now rolls on and off much easier.

this product is exactly what I ordered

I needed this for the front of the trailer and it worked great.

These were not what I needed for my boat, but from the looks and feel of them its a good product. I returned them to Kohl's, which was a great experience. Who ever thought of this deal with Kohl's at Amazon, did well and should be promoted.

Met my expectations as advertised.
Looks to be sturdy but only time will tell.
Only reason I gave it only 4 stars is because i’m not sure how long the push nuts at the shaft ends will stay on.

I used it to be able to push my canoe up on top of my trailer worked well.

Justo lo que se anuncia


Works as expected