MARINE GRADE SPECIALTY CONNECTORS Double Male-Female Adapter Wire Range .250 tab Qty 5
This terminal is well made from brass with a tin coating suitable for marine use where applicable and properly applied and protected. I would not use them for damp or environments subject to heavy corrosion. I use them for branching circuits for low to medium power solar collection system (indoor or weather protected areas only). They are nice and tight in the female F2 connectors. Recommended
Perfect for the job. I have a trolling motor that I have had some issues with wires melting in the foot due to heavy use. I replaced the wires with silicon high temperature #8 with fiberglass high heat sleeves around them and all connectors are high temp nickle plated disconnects. The connectors were very nice. I was grateful to find a piggy back in high temp. Good tight fit and seem well plated. Other connectors seem to loosen after several times disconnecting them. Not these. They are really snug.
Great for making 2 wire connections at 1 terminal or for checking live power on insulated spade terminal connectors, assuming you have the physical space for it without it touching anything else (i.e. uninsulated wire or cabinet). Work smart and safe!
Finally found a marine quality electrical adapter. My review is later because I wanted to make sure it's not showing rust as other competitors are. This is great stuff and would highly recommend it.
These are fine but they will corrode depending upon the connectors that attach to it. They are still one of the best ones I've found for marine use.
Easy to install and the connection works great. It provides a good tight contact. I used these to add other connection for lights on my boat to the accessory switch.
I used these to get 12 volt power off a fuse panel for a USB Charger. They work great. Just make sure that the circuit your adding it to can handle the demand. If so, these are an easy way to go.
These are the way to go for "piggybacking" your connections. Nice solid connection, tinned, and relatively strong. You can bend them for fitment, but I have snapped a couple. So, be careful
These little guys are hard to find and you will need them for your air cooled VW restoration.
Exactly what I needed but delivered a week later. Wish it was a prime item
Received goods everything extremely smooth