Aker Leather 506 Handcuff Case, Open Top


    This fits your.
  • Make sure this fits by entering your model number.
  • Made in the USA using the finest vegetable-tanned cowhide and raw materials
  • Tested and used by law enforcement and federal agencies around the world
  • Fits one pair of standard chain handcuffs
  • Available in black, plain with black snaps
  • Slides onto belts up to 2-1/4"


Aker Leather

Product Code:



In Stock

The Aker Leather 506 Open Top Handcuff Case is made from the highest grade of genuine vegetable tanned leather, and finished with a solid brass snap fastener in black. It features a pull-through release snap for easy access to handcuffs and is designed to fit most standard chain handcuffs, including Smith & Wesson Model 100 handcuffs and the Peerless 700C and 730C. Many agencies, including the State Department, provide this handcuff case to their officers for use on duty. NOTE: since we use premium leather and hand mold each case, the fit may be tight at first, but it will wear over time like a pair of high end leather shoes.

Product details Style Name: Plain
  • Product Dimensions: 1 x 1 x 1 inches ; 0.16 ounces
  • Shipping Weight: 0.3 ounces (View shipping rates and policies)
  • ASIN: B001TOI2F6
  • California residents: Click here for Proposition 65 warning.
  • Item model number: 506

I recently rearranged my duty belt to streamline it and keep my back clean. I’ve had some lingering back pain for quite some time. Running a clean back definitely has helped a lot.

I made the decision to run my cuffs at about the 2 o’clock position (CHP style!?). The traditional style handful case took up a little too much horizontal space as well as digging into my thigh a little bit when sitting.

This cuff case took a little getting used to and it is not a universal in fit. Once I got used to deploying the cuffs with it I am very satisfied. It has loosened up slightly with use and I actually prefer to have my cuffs on the front of my body as opposed to my back. Additionally I can draw the handcuffs with either hand.

I didn’t see many reviews on this product when I ordered it so I kind of took a gamble. I hope this review helps make up your mind if you’re on the fence.

Update: 3 months in and so far so good! Holding up extremely well and have broken in nicely.

Police officer for 11 years. Worse cuff case by far. pouch on the front of my belt, doesnt button, cuffs fall out every day. Bend over they fall out, put on duty belt they fall out, take off duty belt they fall out. It’s really frustrating. Then the pouch on my back every day another officer is pressing the button closed looking out for me. Btw Got in a scuffle and they fell out.

Fit my peerless 700 tight, no rattle when walking, very snug! For those that want an easy draw, try setting your cuffs (to avoid rust, nab a pair from the local jail's broken/rusty cuffs collection) in this snapped closed and let it soaked in water at room temperature and try with the cuffs in, will give the baseball glove feel most people desire on fit. The snap is very stiff and crisp, your cuffs aren't going anywhere unless you want them to. I would highly recommend for a front carry only forward of your holster! Will not be fun or easy to get out or in from your side or back! Had this for a year now, using my cuffs at minimum 5-6 times a day, not a sign of fraying or deformation. All in all, from the 5 or so cuff cases I've gone through, this one I will be buying again after the first one is shot.

Case is well made and looks good. I had issue with the hinged version of these but these seem to be working okay for now. They get a star knocked off because it is a bit difficult to get cuffs back in the but I’d rather that than it be harder to draw the cuffs. I’d still recommend them.

When I initially got this cuff case I was exceedingly pleased. It looked great for wear with a suit and plain clothes, fit both a dress and tactical belt, and fit, albeit tightly, standard chain cuffs. But after less than 3 months of use, the stitching is already coming undone. I have two Aker gun belts and find them to be of excellent quality, but unfortunately the same cannot be said for this cuff case. I am outside the return window otherwise these would be going back.

When I first got it, it was tight and it woulsnt snap. I soaked it in hot water with the cuffs in it for about 10 minutes and now it is absolutely perfect. I highly reccomend this case.

Great quality actually smells like leather and it came with twoCuff cases instead of one which was really nice looks good on my belt matches the rest of my basket weave pouches and actually looks better in real life than the picture show the pictures do not do it justice or not it was a really goodbye and I was surprised with the quality in a good way

First pair came in and the snap broke off in the package. I sent it back Amazon was quick to send out another one. This one works flawlessly. We carry the Smith and Wesson M100 hand cuffs. I am about to order ASP handcuffs I hope they will fit. Ive worked in security for the last 10 years and never needed to handcuff anyone yet. In fact my entire department hasn't handcuffed anyone in 10 year. So the leather is a little tuff I am ok with that. It's secure on my 2.25 inch duty belt. And it's slim unlike any other cases I've seen. Now 4 people in my department have ordered them because they are that much better. I only rate 4 stars because of the first one I ordered. If they fit the ASP handcuffs I ordered then I'll change it to 5 stars.

Worst case, not at all like the picture. It doesn’t fit my regular peerless.....

Very stiff leather. Unable to close one of the pouches I bought. I'm still attempting to "break in" the leather so that I can secure my cuffs in it.